Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
CH1-CH4 or D0-D
15
is the channel to use as the SPI SCLK source.
BUS:B<x>:SPI:DATA{:IN|:MISO}:POLARity
Sets or returns the SPI MISO polarity for bus <x>, where x is the bus number.
Conditions
This command r equires a DPO4EMBD application module.
Group
Bus
Syntax
BUS:B<x>:SPI:DATA{:IN|:MIS O}:POLARity {LOW|HIGH}
BUS:B<x>:SPI:DATA{:IN|:MIS O}:POLARity?
Arguments
LOW specifies an active low polarity.
HIGH specifies an active high polarity.
BUS:B<x>:SPI:DATA{:IN|:MISO}:SOUrce
Sets or returns the SPI MISO source for bus <x, where x is the bus number.
Conditions
This command r equires a DPO4EMBD application module.
Group
Bus
Syntax
BUS:B<x>:SPI:DATA{:IN|:MIS O}:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12 |D13|D14|D15}
BUS:B<x>:SPI:DATA{:IN|:MIS O}:SOUrce?
Arguments
CH1-CH4 or D0-D15 is the channel to use as the SPI MISO source.
BUS:B<x>:SPI:DATA{:OUT|:MOSI}:POLARity
Sets or returns the SPI MOSI polarity for bus <x>, where x is the bus number.
Conditions
This command r equires a DPO4EMBD application module.
MSO4000 and DPO4000 Series Programmer Manual 2-107