Filter
Top Products
Commands Listed in Alphabetical Order
NOTE. This comm
and and query does not apply to incoming waveform data.
Group
Waveform Transfer
Syntax
DATa:ENCdg
{ASCIi|FAStest|RIBinary|R PBinary|SRIbinar y|SRPbinary}
DATa:ENCdg?
Related Commands
WFMOutpre:ENCdg, WFMOutpre:BN_Fmt, WFMOutpre:BYT_Or
Arguments
ASCIi specifies the ASCII representation for waveform data points. If ASCII is
the value, then :BN_Fmt and :BYT_Or are ignored.
FAStest specifies that the data be sent in the fastest possible manner consistent
with maintaining accuracy and is interpreted with respect to the waveform
specified by DATa:SOUrce.
RIBINARY specifies signed integer data point representation with the most
significant byte transferred first.
When :BYT_Nr is 1, the range is from -128 through 127. When :BYT_Nr is 2,
the range is from -32,768 through 32,767. Center screen is 0 (zero). The upper
limit is the top of the screen and the lower limit is the bottom of the screen. This
is the default argument.
RPBinary specifies the positive integer data-point representation, with the most
significant byte transferred first.
When :BYT_Nr is 1, the range from 0 through 255. When :BYT_Nr is 2, the
range is from 0 to 65,535. The center of the screen is 127. The upper limit is the
top o f the screen and the lower limit is the bottom of the screen.
SRIbinary is the same as RIBinary except that the byte order is swapped,
meaning that the least significant byte is transferred first. This format is useful
when transferring data to IBM compatible PCs.
SRPbinary is the same as RPBinary except that the byte order is swapped,
meaning that the least significant byte is transferred first. This format is useful
when transferring data to PCs.
Table 2-37: DA
Ta and WFMOutpre Parameter Settings
WFMOutpre Settings
DATa:ENCdg
Setting :ENCdg :BN_Fmt :BYT_Or :BYT_NR
ASCii ASC N/A N/A
1,2
FAStest
BIN RI
MSB
1,2
RIBinary BIN RI
MSB
1,2
2-148 MSO4000 and DPO4000 Series Programmer Manual