Filter
Top Products
Commands Listed in Alphabetical Order
Loss power enab
led, it indicates the possibility of incorrect settings and might
return the following :
*ESR?
20
ALLEV?
2202,"Measurement error, No period found;
:power:swloss:numcycles?",410,"Query INTERRUPTED"
POWer:SWLoss:RDSon
Sets or re
turns the user RDSON value for use in switching loss calculations when
the conduction calculation method is RDSON.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SWLoss:RDSon <NR3>
POWer:SWLoss:RDSon?
Arguments
<NR3> is the RDSON switching loss calculation.
Examples
POWER:SWLOSS:RDSON 30 sets the RDSon value to 30.0000.
POWER:SWLOSS:RDSON ? might return :POWER:SWLOSS:RD Son 20.0000E-3
indicating that the RDSon value is set to 20.0000E-3.
POWer:SWLoss:REFLevel:ABSolute:GATEMid
Sets or returns the mid voltage reference level used in switching loss power
measurements in volts.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SWLoss:REFLevel:ABSo lute:GATEMid <NR3>
POWer:SWLoss:REFLevel:ABSo lute:GATEMid?
MSO4000 and DPO4000 Series Programmer Manual 2-303