Filter
Top Products
Command Groups
Search Commands (cont.)
Command Description
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<1-4>:AUDio:CONDition
Sets or returns the search trigger condition
for the AUDIO bus: S tart of Frame or Data
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<1-4>:AUDio:DATa:HIVALue
Sets or returns the search trigger data upper
word for the AUDIO bus
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<1-4>:AUDio:DATa:OFFSet
Sets or returns the search trigger data offset
for the AUDIO bus
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<1-4>:AUDio:DATa:QUALifier
Sets or returns the search trigger data
qualifier for the AUDIO bus
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<1-4>:AUDio:DATa:VALue
Sets or returns the search trigger data lower
word for the AUDIO bus
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<1-4>:AUDio:DATa:WORD
Sets or returns the search trigger data
alignment for the AUDIO bus
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:CON Dition
Sets or returns the search condition for CAN
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:DATa:DIRection
Sets or returns the CAN search condition to
be valid on a READ, WRITE or either
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:DATa:QUALifier
Sets or returns the CAN data qualifi er
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:DATa:SIZe
Sets or returns the length of the data string
in bytes to be used for CAN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:DATa:VALue
Sets or returns the binary data string to be
used for CAN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:FRAM Ety pe
Sets or returns the CAN Frame Type to be
used
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN{:IDentifier|:ADDRess}:MODe
Sets or returns the CAN addressing mode to
standard or extended format
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN{:IDentifier|:ADDRess}:VALue
Sets or returns the binary address string to
be used for CAN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:CONDition
Sets or returns the trigger condition for
FLEXRAY
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:CYCLEcount:HIVALue
Sets or returns the binary data string to be
used for FLEXRAY cycle count high value
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:CYCLEcount:QUALifier
Sets or returns the FLEXRAY cycle count
qualifier
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:CYCLEcount:VALue
Sets or returns the binary data string to be
used for FLEXRAY cycle count low value
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:DATa:HIVALue
Sets or returns the high binary data string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:DATa:OFFSet
Sets or returns the offset of the data string
in bytes
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:DATa:QUALifier
Sets or returns the FLEXRAY data qualifier
2-42 MSO4000 and DPO4000 Series Programmer Manual