Filter
Top Products
Command Groups
Table 2-31: Trigger Commands (cont.)
Command
Description
TRIGger:A:BUS:B<x>:FLEXray:HEADER:CY CLEcount Sets or returns the cycle
count portion of the binary
header string
TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID Sets or returns the frame id
portion of the binary header
string
TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits Sets or returns the indicator
bits portion of the binary
header string
TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength Sets or returns the payload
length portion of the binary
header string
TRIGger:A:BUS:B <x>:I2C:ADDRess:MOD e Sets or returns the I2C
address mode to 7 or 10-bit
TRIGger:A:BUS:B <x >:I2C:AD DRess:TYPe Sets or returns the I2C
address type to USER
TRIGger:A:BUS:B <x >:I2C:AD DRess:VALue Sets or returns the binary
address string used for the
I2C trigger
TRIGger:A:BUS:B <x>:I2C:CONDition Sets or returns the trigger
condition for I2C trigger
TRIGger:A:BUS:B <x>:I2C:DATa :DIR ection Sets or returns the I2C
trigger condition valid on a
READ, WRITE, or either
TRIGger:A:BUS:B <x>:I2C:DATa :SIZe Sets or returns the length of
thedatastringinbytestobe
used for I2C trigger
TRIGger:A:BUS:B<x>:I2C:DATa:VALue Sets or returns the binary
datastringusedforI2C
triggering
TRIGger:A:BUS:B <x>:LIN:CONDition Sets or returns the trigger
condition for LIN
TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue Sets or returns the binary
datastringtobeusedforLIN
trigger
TRIGger:A:BUS:B <x >:LIN:DATa:QU ALifier Sets or returns the LIN data
qualifier
TRIGger:A:BUS:B <x>:LIN:DATa :SIZe Sets or returns the length of
thedatastringinbytestobe
used for LIN trigger
TRIGger:A:BUS:B<x>:LIN:DATa:VALue Sets or returns the binary
data string
TRIGger:A:BUS:B<x>:LIN:ERRTYPE Sets or returns the error type
MSO4000 and DPO4000 Series Programmer Manual 2-51