Filter
Top Products
Commands Listed in Alphabetical Order
NOTE. The comma
nd returns NA, if the current harmonic standard is set to a new
standard other than the returned query.
Conditions
This command
requires a DPO4PWR application module.
Group
Power
Syntax
POWer:HARMonics:RESults:HA R<1-400>:FREQue ncy?
Examples
POWER:HARMONICS:RESULTS:HA R400:FREQUENCY? might return
:POWER:HARMONICS:RESULTS:H AR400:FREQUENCY 24000 indicating that
the harmonic frequency is set to 24000.
POWer:HARMonics:RESults:HAR<1-400>:IECMAX? (Query Only)
The IEC Standard specifies harmonics measuremen ts to be computed in time
windows, with each time window being nominally 200 ms. This returns the
maximum of the RMS magnitude of the harmonic, computed across
successive
200 ms time windows within an observation period entered by the user.
NOTE. The command returns NA, if the current harmonic standard is set to a new
standard other than the returned query.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:RESults:HA R<1-400>:IECMAX ?
Examples
POWER:HARMONICS:RESULTS:HA R400:IECMAX? might return
:POWER:HARMONICS:RESULTS:H AR400:IECMAX 1.0 indicating that the
maximum value is 1.0 A for the 400th harmonic.
POWer:HARMonics:RESults:HAR<1-400>:LIMit? (Query Only)
The IEC and MIL standards specify a limit for each harmonic magnitude. Returns
the limit in absolute units, or as a percentage of the fundamental as specified by
MSO4000 and DPO4000 Series Programmer Manual 2-259