Filter
Top Products
Status and Events
Table 3-8: Exec
ution Warning Messages (EXE Bit 4)
Code Message
528
Parameter out of range
532
Curve data too long, Curve truncated
533
Curve error, Preamble values are inconsistent
540 Measuremen
t warning, Uncertain edge
541 Measurement warning, Low signal amplitude
542 Measurement warning, Unstable histogram
543 Measureme
nt warning, Low resolution
544 Measurement warning, Uncertain edge
545 Measurement warning, Invalid in minmax
546 Measurem
ent warning, Need 3 edges
547
Measure
ment warning, Clipping positive/negative
548
Measur
ement warning, Clipping positive
549
Measur
ement warning, Clipping negative
Table 3-9: Execution Warning Messages (EXE Bit 4)
Code Message
540 Measurement warning
541 Measurement warning, Low signal amplitude
542 Measurement warning, Unstable histogram
543 Measurement warning, Low resolution
544 Measurement warning, Uncertain edge
545 Measurement warning, Invalid min max
546 Measurement warning, Need 3 edges
547
Measurement warning, Clipping positive/negative
548
Measurement warning, Clipping positive
549
Measurement warning, Clipping negative
Internal Warning
The following table shows internal errors that indicate an internal fault in the
oscilloscope.
Table 3-10: Internal Warning Messages
Code Message
630
Internal warning, 50Ω overload
MSO4000 and DPO4000 Series Programmer Manual 3-17