Filter
Top Products
Commands Listed in Alphabetical Order
TRIGger:A:BU
S:B<x>:LIN:DATa:VALue
Sets or returns the binary data string to be used for LIN trigger condition if trigger
condition is ID or IDANDDATA.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:LIN:DAT a:VALue <QString>
TRIGger:A:BUS:B<x>:LIN:DAT a:VALue?
Arguments
<QString> is a q uoted string that is the LIN trigger data value.
Examples
TRIGGER:A:BUS:B1:LIN:DATA: VALUE “11001101”sets the data value to
11001101.
TRIGGER:A:BUS:B1:LIN:DATA: VALUE? might return
TRIGGER:A:BUS:B1:LIN:DATA: VALUE "XXXXXXXX" indicating the
data value is don’t care.
TRIGger:A:BUS:B<x>:LIN:ERRTYPE
Sets or returns the error type be used for LIN trigger.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:LIN:ERR TYPE
{SYNC|PARity|CHecksum|HEAD ertime|RESPtime |FRAMetime}
TRIGger:A:BUS:B<x>:LIN:ERR TYPE?
Arguments
SYNC sets the LIN error type to SYNC.
PARity sets the LIN error type to parity.
CHecksum sets the LIN e rror type to checksum.
HEADertime sets the LIN error t ype to header time.
RESPtime sets the LIN error type to response time.
FRAMetime sets the LIN error type to frame time.
Examples
TRIGGER:A:BUS:B1:LIN:ERRTY PE CHECKSUM sets the LIN error type to
checksum.
MSO4000 and DPO4000 Series Programmer Manual 2-419