Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
NORMal sets the
RS-232C bus polarity to positive.
INVERTed sets the RS-232C bus polarity to negative.
BUS:B<x>:RS232C:RX:SOUrce
Sets or returns the RS-232 RX source for bus <x>, where x is the bus number.
Conditions
This command requires a DPO4COMP application module.
Group
Bus
Syntax
BUS:B<x>:RS232C:RX:SOUrce {CH1|CH2|CH3 |CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12 |D13|D14|D15|Off}
BUS:B<x>:RS232C:RX:SOUrce?
Arguments
CH1–CH4 or D0–D15 specifies the channel to use for the R S-232 RX source.
Off sets the specified bus input to off.
BUS:B<x>:RS232C:TX:SOUrce
Sets or returns the RS-232 TX Source for bus <x>, where x is the bus number.
Conditions
This command requires a DPO4COMP application module.
Group
Bus
Syntax
BUS:B<x>:RS232C:TX:SOUrce {CH1|CH2|CH3 |CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12 |D13|D14|D15|Off}
BUS:B<x>:RS232C:TX:SOUrce?
Arguments
CH1–CH4 or D0–D15 specifies the channel to use as the RS-232 TX source.
Off sets the specified bus input to off.
BUS:B<x>:SPI:BITOrder
Sets or returns the bit order for the specified SPI bus. LSB is le ast significant bit
first; MSB is most s ignificant bit first.
MSO4000 and DPO4000 Series Programmer Manual 2-105