Filter
Top Products
Commands Listed in Alphabetical Order
NOTE. Setting t
he DESER and the ESER to the same values allows only those
codes to be entered into the Event Queue and summarized on the ESB bit (bit 5) of
the Status Byte Register. Use the DESE command to set the DESER.
Examples
*ESE 209 sets the ESER to binary 11010001, which enables the PON, URQ,
EXE, and OPC bits.
*ESE? might return 186, showing that the ESER contains the binary value
10111010.
*ESR? (Qu
ery Only)
Returns the contents of the Standard Event Status Register (SESR). *ESR? also
clears the SESR (reading the SESR clears it). For a detailed discussion on how
to use re
gisters, see Registers.
Group
Status and Error
Syntax
*ESR?
Related Commands
ALLEv?, *CLS, DESE, *ESE, EVENT?, EVMsg?, *SRE, *STB?
Examples
*ESR? might return 213, showing that the SESR contains the binary value
11010101.
ETHERnet:DHCPbootp
Sets or returns the network initialization search for a DHCP/BOOTP server.
Group
Ethernet
Syntax
ETHERnet:DHCPbootp {ON|OFF}
ETHERnet:DHCPbootp?
Arguments
ON enables the oscilloscope to search the network for a D HCP or BOOTP server
in order to automatically assign a dynamic IP address to the oscilloscope.
MSO4000 and DPO4000 Series Programmer Manual 2-165