Filter
Top Products
Commands Listed in Alphabetical Order
POWer:HARMon
ics:RESults:HAR<1-400>:TEST:IEC:NORMAL? (Query Only)
Specifies if the Normal IEC harmonic limits are met.
NOTE. The command returns NA if the standard does not specify a limit.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:RESults:H AR<1-400>:TEST:I EC:NORMAL?
Returns
PASS, FAIL,orNA.
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:POHCLIMit? (Query Only)
Specifies if the higher harmonic limit (and conditions) for the 21st and higher
order odd harmonics are met.
NOTE. The command returns NA if the limit does not apply for a specific
harmonic.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:RESults:H AR<1-400>:TEST:I EC:POHCLIMit?
Returns
PASS, FAIL,orNA.
POWer:HARMonics:RESults:HAR<1-400>:TEST:MIL:NORMAL? (Query Only)
Returns the test result for the specified harmonic for the MIL-STD-1399 testing
standard.
This query is analogous to that for the IEC 61000-3-2 standard
POWer:HARMonics:RESults:HAR<1-400>:TEST:IEC:NORMAL? command.
2-262 MSO4000 and DPO4000 Series Programmer Manual