Filter
Top Products
Commands Listed in Alphabetical Order
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:D ATa:SIZe <NR1 >
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:D ATa:SIZe?
Arguments
<NR1> is the data string length in bytes.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue
Sets or returns the binary data string to be used for an I2C trigger search if the
search condition is DATA or ADDRANDDATA.
SEARCH<x> is the search
number and
B<x> is the bus number.
Conditions
This command r equires a DPO4EMBD application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:D ATa:VALue <bi n>
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:D ATa:VALue?
Arguments
<bin> is the data in binary format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition
Sets or returns the search condition for a LIN search.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:LIN:C ONDition
{SYNCField|IDentifier|DATA |IDANDDATA|WAKE up|SLEEP|ERROR
}
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:LIN:C ONDition?
Arguments
SYNCField specifies to se arch on the sync field.
IDentifier specifies to search on the identifi er.
DATA specifies to search on the data.
IDANDDATA specifies to search on the ide ntifier and the data.
WAKEup specifies to search on wake up.
MSO4000 and DPO4000 Series Programmer Manual 2-353