Filter
Top Products
Commands Listed in Alphabetical Order
BUS:B<1-4>:A
UDio:DATa:POLarity
Sets or returns the data polarity for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
Syntax
BUS:B<1-4>:AUDio:DATa:POL arity {NORMal|INVERTed}
BUS:B<1-4>:AUDio:DATa:POL arity?
Arguments
NORMal specifies positive data polarity for the audio bus.
INVERTed specifies negative data polarity for the audio bus.
Exampl
es
BUS:B1:AUDIO:DATA:POLARIT Y INVERTed sets the data polarity to Inverted.
BUS:B1:AUDIO:DATA:POLARIT Y? might return
:BUS:B1:AUDIO:DATA:POLARI TY NORMAL indicating that the data polarity is
set to Normal.
BUS:B<1-4>:AUDio:DATa:SIZe
Sets or returns the number of bits per word for the AUDIO bus.
NOTE. The number of bits specified for this command must be always less than or
equal to the number of bits per channel (BUS:B<x>:AUDio:CHANnel:SIZe)
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
Syntax
BUS:B<1-4>:AUDio:DATa:SIZ e <NR1>
BUS:B<1-4>:AUDio:DATa:SIZ e?
Arguments
NR1 specifiesthenumberofbitsperword.
2-86 MSO4000 and DPO4000 Series Programmer Manual