Filter
Top Products
Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:RUNT:POLarity
Sets or returns the polarity setting for a runt trigger search to determine where to
place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:RUNT:POLarity
{EITher|NEGative|POSitive }
SEARCH:SEARCH<x>:TRIGger: A:RUNT:POLarity?
Arguments
POSitive places a mark when the rising edge crosses the low threshold and
the falling edge re-crosses the low threshold without either edge ever crossing
the high threshold.
NEGative places a mark when the falling edge crosses the high threshold and
the rising edge re-crosses the high threshold without either edge ever crossing
the low threshold.
EITher places a mark on a runt of either polarity.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce
Sets or returns the source setting for a runt trigger search to determine where to
place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:RUNT:SOUrce
{CH1|CH2|CH3|CH4|MATH|REF }
SEARCH:SEARCH<x>:TRIGger: A:RUNT:SOUrce?
Arguments
CH1–CH4 specifies an input channel as the edge source.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn
Sets or returns the condition setting for a runt trigger search to determine where to
place a mark. <x> is the search number.
2-374 MSO4000 and DPO4000 Series Programmer Manual