Filter
Top Products
Commands Listed in Alphabetical Order
TRIGger:A:BU
S:B<1-4>:AUDio:DATa:WORD
Sets or returns the trigger data alignment for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Trigger
Syntax
TRIGger:A:BUS:B<1-4>:AUDio :DATa:WORD {EITher|LEFt|RIGht}
TRIGger:A:BUS:B<1-4>:AUDio :DATa:WORD?
Arguments
EITher aligns the trigger data to either left or right.
LEFt aligns the trigger data to the left.
RIGht aligns the trigger data to the right.
TRIGger:A:BUS:B<x>:CAN:CONDition
Sets or returns the CAN trigger condition for bus <x>, where x is the bus number.
Conditions
Requires a DPO4AUTO application module.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:CAN:CON Dition
{SOF|FRAMEtype|IDentifier| DATA|IDANDDATA| EOF|ACKMISS}
TRIGger:A:BUS:B<x>:CAN:CON Dition?
Arguments
SOF enables triggering on the start of frame.
FRAMEtype enables triggering on the type of frame.
IDentifier enables triggering on a matching identifier.
DATA enables triggering on matching data.
IDANDDATA enables triggering on a matching identifier and matching data.
EOF enables triggering on the end of frame.
ACKMISS enables triggering on a missing acknowledge.
MSO4000 and DPO4000 Series Programmer Manual 2-397