Tektronix DPO4000 Landscape Lighting User Manual


 
Commands Listed in Alphabetical Order
Related Commands
WFMOutpre:ENC
dg, WFMOutpre:BYT_Nr
Arguments
LSB species that the least signicant byte will be transmitted rst.
MSB species that the most signi cant byte will be transmitted rst.
Examples
WFMOUTPRE:BYT_OR MSB sets the most signicant outgoing byte of waveform
data to be transmitted rst.
WFMOUTPRE:BYT_OR? might return :WFMOUTPRE: BYT_OR LSB indicating that
the least signicant data byte will be transmitted rst.
WFMOutpre:ENCdg
Sets and queries the type of encoding for outgoing waveforms.
Group
Waveform Transfer
Syntax
WFMOutpre:ENCdg {ASCii|BINary}
WFMOutpre:ENCdg?
Related Commands
DATa:ENCdg, WFMOutpre:BYT_N
r, WFMOutpre:BYT_Or,
WFMOutpre:BIT_Nr, WFMOutpre:BN_Fmt
Arguments
ASCii species that the outgoing data is to be in ASCII format. Waveforms
will be sent as
<NR1> numbers.
BINary spec ies that outgoing data is to be in a binary format whose further
specication is determined by WFMOutpre:BYT_Nr, WFMOutpre:BIT_Nr,
WFMOutpre:BN_Fmt and WFMOutpre:BYT_Or.
Examples
WFMOUTPRE:ENCDG? might return :WFM OUTPRE:ENCDG BIN indicating that
outgoing waveform data will be sent in binary format.
WFMOUTPRE:ENCDG ASC spec ies that the outgoing waveform data will be sent
in ASCII format.
WFMOutpre:FRACTional? (Query Only)
The set form of this command is ignored. The query form always returns a 0, if
the waveform specied by DATA:SOUrce is on or displayed. If the waveform
2-490 MSO4000 and DPO4000 Series Programmer Manual