Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
SELect:BUS<x>
{<NR1>|OFF|ON}
SELect:BUS<x>?
SELect:CH<x>
Turns the display of the channel <x> waveform on or off, where <x > is the
channel number. This command also rese ts the acquisition. The query returns
whether the channel is on or off but does not indicate whether it is the selected
waveform.
Group
Vertical
Syntax
SELect:CH<x> {ON|OFF|<NR1>}
SELect:CH<x>?
Arguments
ON turns on the display of the speci fi ed waveform. This waveform also becomes
the selected waveform.
OFF turns off the display of the specified waveform.
<NR1> = 0 turns off the display of the specified waveform; any other value turns
on the display of the specified waveform.
Examples
SELECT:CH2 ON turns the channel 2 waveform display on, and selects channel 2.
SELECT:CH1? might return :SELECT:CH1 1 indicating that channel 1 is being
displayed.
SELect:CONTROl
Sets or
returns the waveform that is the recipient of future channel-related
commands, for example, the cursor commands. The command form also performs
the equivalent of a SELect:CH<x> ON command, as well as the Math, Reference,
and Bus variations of that command.
Group
Vertical
Syntax
SELect:CONTROl {CH<x>|MATH|BUS<x>}
SELect:CONTROl?
Arguments
CH<x> specifies a channel wa veform as the wa veform affected by the front-panel
controls. <x> is the channel number.
2-384 MSO4000 and DPO4000 Series Programmer Manual