Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
CH1–CH4 specifi
es the analog channel to u se as the I2C SCLK source.
D0–D15 specifies the digital channel to use as the I2C SCLK source.
BUS:B<x>:I2C{:DATA|:SDATA}:SOUrce
Sets or returns the I2C SDATA source for bus <x>, where x is the b us number.
Conditions
This command r equires a DPO4EMBD application module.
Group
Bus
Syntax
BUS:B<x>:I2C{:DATA|:SDATA} :SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12 |D13|D14|D15}
BUS:B<x>:I2C{:DATA|:SDATA} :SOUrce?
Arguments
CH1–CH4 specifies the analog channel to use as the I2C SDATA source.
D0–D15 specifies the digital channel to use as the I2C SCLK source.
BUS:B<x>:LABel
Sets or returns the waveform label for bus < x>, where x is the bus number
1 through 4.
Group
Bus
Syntax
BUS:B<x>:LABel <Qstring>
BUS:B<x>:LABel?
Arguments
<Qstring> is an alphanumeric string of text, enclosed in quotes, that contains the
text label information for bus <x>. The text string is limited to 30 characters.
BUS:B<x>:LIN:BITRate
Sets or returns the bit rate for LIN.
Group
Bus
MSO4000 and DPO4000 Series Programmer Manual 2-97