Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
BUS:B<1-4>:AU
Dio:TYPe {I2S|LJ|RJ|TDM}
BUS:B<1-4>:AUDio:TYPe?
Arguments
I2S specifies I
2
S audio format.
LJ specifies left-justified audio format.
RJ specifies right justifi ed audio format.
TDM specifies time-division multiplexing audio format.
Examples
BUS:B1:AUDIO:TYPE RJ sets right-justified as the audio format.
BUS:B1:AUDIO:TYPE? might return :BUS:B1:AUDIO:T YPE I2S indicating
that the audio format is set to I
2
S.
BUS:B<1-4>:AUDio:WORDSel:POLarity
Sets or returns the word select polarity for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
Syntax
BUS:B<1-4>:AUDio:WORDSel: POLarity {NORMal|INVERTed}
BUS:B<1-4>:AUDio:WORDSel: POLarity?
Arguments
NORMal specifies positive WORDSel polarity.
INVERTed specifies negative WORDSel polarity.
Examples
BUS:B1:AUDIO:WORDSEL:POLA RITY NORMal sets normal as the word select
polarity.
BUS:B1:AUDIO:WORDSEl:POLA RITY? might return
:BUS:B1:AUDIO:WORDSEL:POL ARITY NORMAL indicating that the word select
polarity is set to normal.
BU
S:B<1-4>:AUDio:WORDSel:SOUrce
Sets or returns the word select source waveform for the AUDIO bus.
C
onditions
This command requires DPO4AUDIO application module.
2-90 MSO4000 and DPO4000 Series Programmer Manual