Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
SEARCH:SEARCH
<x>:TRIGger:A:BUS:B<x>:SPI:C ONDition
{SS|STARTofframe|MISO|MOS I|MISOMOSI}
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:SPI:C ONDition?
Related Commands
BUS:B<x>:SPI:IDLETime, BUS:B<x>:SPI:FRAMING
Arguments
SS specifies a search based on the Slave Selection condition.
STARTofframe is applicable when BUS:B<x>:SPI:FRAMING is set to
IDLEtime. When the trigger condition is set to STA RTofframe,theinstrument
triggers on the first SPI clock after an idle time when there are no clocks.
MISO specifies a search based on the Master-In Slave-Out condition.
MOSI specifies a searc h based on the Master-Out Slave-In condition.
MISOMOSI specifies a search based on the Master-In Slave-Out and Master-Out
Slave-In conditions.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa{:MISO|:IN}:VALue
Sets or returns the binary data string for an SPI trigger search if the search
condition is MISO or MISOMOSI.
SEARCH<x> is the search number and B<x>
is the bus number.
Conditions
This command requires a DPO4EMBD application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:SPI:D ATa{:MISO|:IN}:
VALue < bin>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:SPI:D ATa{:MISO|:IN}:
VALue?
Arguments
<bin> is the data string in binary format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa{:MOSI|:OUT}:VALue
Sets or returns the binary data string for an SPI trigger search if search the
condition is MOSI, or MISOMOSI.
SEARCH<x> is the search number and B< x>
is the bus number.
2-360 MSO4000 and DPO4000 Series Programmer Manual