Filter
Top Products
Commands Listed in Alphabetical Order
Conditions
This command r e
quires a DPO4EMBD application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:A DDRess:TYPe
{GENeralcall|STARtbyte|HSm ode|EEPROM|USER }
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:A DDRess:TYPe?
Arguments
GENeralcall speci fi es the GENeralcall address type.
STARtbyte specifies the STARtbyte address type.
HSmode spec ifies the HSmode address type
EEPROM specifies the EEPROM address type.
USER specifies a user address .
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue
Sets or returns the binary address string to be used for an I2C trigger search if
the search condition is ADDR or ADDRANDDATA.
SEARCH<x> is the search
number and
B<x> is the bus number.
Conditions
This command r equires a DPO4EMBD application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:A DDRess:VALue <bin>
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:I2C:A DDRess:VALue?
Arguments
<bin> is the address in binary format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition
Sets or returns the search condition for an I2C trigger search. SEARCH<x> is the
search number and
B<x> is the bus number.
Conditions
This command r equires a DPO4EMBD application module.
Group
Search
MSO4000 and DPO4000 Series Programmer Manual 2-351