Support User Manuals

Tektronix DPO4000 Landscape Lighting User Manual

Open as PDF

of 585

Command Groups

Table 2-15: Bus Commands (cont.)

Commands Description

BUS:B<x>:LIN:SOUrce Sets or returns the LIN data source

BUS:B<x>:LIN:STANDard Sets or returns the LIN standard

BUS:B<x>:PARallel:BIT<x>:SOUrce Sets or returns the Parallel bit source for the

speciﬁed bus

BUS:B<x>:PARallel:CLOCK:EDGE Sets or returns the Parallel clock edge for

the speciﬁed bus

BUS:B<x>:PARallel:CLOCK:ISCLOCKed Sets or returns the Parallel bus clock function

for the speciﬁed bus

BUS:B<x>:PARallel:CLOCK:SOUrce Sets or returns the Parallel clock source for

the speciﬁed bus

BUS:B<x>:PARallel:WIDth Sets or returns the width of the Parallel bus

BUS:B<x>:POSition Sets or returns the position of the speciﬁed

bus waveform

BUS:B<x>:RS232C:BITRate Sets or returns the RS-232 bit rate for the

speciﬁed bus

BUS:B<x>:RS232C:DATABits Sets or returns the number of bits for the

data frame

BUS:B<x>:RS232C:DELIMiter Sets or returns the RS-232 delimiting value

for a packet on the speciﬁed bus

BUS:B<x>:RS232C:DISplaymode Sets or returns the display mode for the

speciﬁed bus display and event table

BUS:B<x>:RS232C:PARity Sets or returns parity for RS-232 data

BUS:B<x>:RS232C:POLarity Sets or returns the RS-232C polarity for the

speciﬁed bus

BUS:B<x>:RS232C:RX:SOUrce Sets or returns the RS-232 RX source

BUS:B<x>:RS232C:TX:SOUrce Sets or returns the RS-232 TX Source

BUS:B<x>:SPI:BITOrder Sets or returns the bit order for the speciﬁed

SPI bus

BUS:B<x>:SPI{:CLOCK|:SCLK}:POLARity Sets or returns the SPI SCLK polarity

BUS:B<x>:SPI{:CLOCK|:SCLK}:SOUrce Sets or returns the SPI SCLK source

BUS:B<x>:SPI:DATA{:IN|:MISO}:POLARity Sets or returns the SPI MISO polarity

BUS:B<x>:SPI:DATA{:IN|:MISO}:SOUrce Sets or returns the SPI MISO source

BUS:B<x>:SPI:DATA{:OUT|:MOSI}:

POLARity

Sets or returns the SPI MOSI polarity

BUS:B<x>:SPI:DATA{:OUT|:MOSI}:SOUrce Sets or returns the SPI MOSI source

BUS:B<x>:SPI:DATA:SIZe Sets or returns the number of bits per word

for the speciﬁed bus

BUS:B<x>:SPI:FRAMING Sets or returns the SPI framing type

BUS:B<x>:SPI:IDLETime Sets or returns the SPI bus idle time in

seconds for the speciﬁed bus

MSO4000 and DPO4000 Series Programmer Manual 2-15

previous next