Filter
Top Products
Commands Listed in Alphabetical Order
Related Commands
TRIGger:B:EDG
E?
Arguments
CH<x> specifies one of the input channels as the B trigger sou
rce.
EXT specifies an external trigger (using the Aux In connector, located on the front
panel of the oscilloscope) as the B trigger source.
LINE specifies the power line as the B trigger source.
Examples
TRIGGER:B:EDGE:SOURCE CH4 sets channel 4 as the input source for the B
trigger.
TRIGGER:B:EDGE:SOURCE? might return :TRIGGER:B:EDGE:SOURCE CH1
indicating that the current input source for the B trigger is channel 1.
TRIGger:B:EVENTS? (Query Only)
Returns the current B trigger events parameter.
Group
Trigger
Syntax
TRIGger:B:EVENTS?
Related Commands
TRIGger:B:EVENTS:COUNt
Examples
TRIGGER:B:EVENTS? might return
:TRIGGER:B:EVENTS:COUNT 2
indicating that 2 events must occur before the B trigger occurs.
TRIGger:B:EVENTS:COUNt
Sets or returns the number of events that must occur before the B trigger (when
TRIG:DELay:BY is set to EVENTS).
Group
Trigger
Syntax
TRIGger:B:EVENTS:COUNt <NR1>
TRIGger:B:EVENTS:COUNt?
2-466 MSO4000 and DPO4000 Series Programmer Manual