Filter
Top Products
Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A{:TRANsition|:RISEFall}:DELTatime
Sets or returns the transition time setting for an transition trigger search to
determine where to place a mark.<x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A{:TRANsition|:R ISEFall}:DELTatime
<NR3>
SEARCH:SEARCH<x>:TRIGger: A{:TRANsition|:R ISEFall}:DELTatime?
Arguments
<NR3> specifies the transition time, in seconds.
SEARCH:SEARCH<x>:TRIGger:A{:TRANsition|:RISEFall}:POLarity
Sets or returns the polarity setting for an transition trigger search to determine
where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A{:TRANsition|:R ISEFall}:POLarity
{EITher|NEGative|POSitive }
SEARCH:SEARCH<x>:TRIGger: A{:TRANsition|:R ISEFall}:POLarity?
Arguments
POSitive specifies that a pulse edge must traverse from the lower (mos t
negative) to higher (most positive) level for transition triggering to occur.
NEGative specifies that a pulse edge must traverse from the upper (most positive)
to lower (most negative) level for transition triggering to occur.
EITher specifies either positive or negative polarity.
SEARCH:SEARCH<x>:TRIGger:A{:TRANsition|:RISEFall}:SOUrce
Sets or returns the source setting for an transition trigger search to determine
where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A{:TRANsition|:R ISEFall}:SOUrce
{CH1|CH2|CH3|CH4|MATH}
2-380 MSO4000 and DPO4000 Series Programmer Manual