Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
CH<x> specifies
one input channel as the edge source, where <x> = 1, 2, 3 or 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn
Sets or returns the condition for generating a pulse width search to determine
where to pl
ace a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:WHE n
{LESSthan|than|EQual|UNEQu al}
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:WHE n?
Arguments
LESSThan places a mark if the pulse width is less than the time set by the
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command.
Than places a mark if the pulse width is true longer than the specified time set by
the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command.
EQUal places a mark if the pulse width is equal to the time set by the
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command w ithin a
tolerance of ±5%.
UNEQual places a mark if the pulse width is unequal to the time the time set by
the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command within a
tolerance of ±5%.
SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth
Sets or returns the pulse width setting for a pulse width trigger search to determine
where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:WID th <NR3>
SEARCH:SEARCH<x>:TRIGger:A :PULSEWidth:WID th?
Arguments
<NR3> is the pulse width.
MSO4000 and DPO4000 Series Programmer Manual 2-373