Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
SEARCH:SEARCH
<x>:TRIGger:A:SETHold:CLOCk: EDGE {FALL|RISe}
SEARCH:SEARCH<x>:TRIGger: A:SETHold:CLOCk: EDGE?
Arguments
FALL specifies polarity as the clock falling edge.
RISe specifies polarity as the clock rising edge.
SEARCH:SEARCH<x>
:TRIGger:A:SETHold:CLOCk:SOUrce
Sets or returns the clock source setting for an setup/hold trigger search to
determine where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:SETHold:CLOCk: SOUrce
{CH1|CH2|CH3|CH4|MATH|REF }
SEARCH:SEARCH<x>:TRIGger: A:SETHold:CLOCk: SOUrce?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce
Arguments
CH1–CH4 specifies an input channel as the edge source.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold
Sets or returns the clock threshold setting for an setup/hold trigger search to
determine where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:SETHold:CLOCk: THReshold
{<NR3>|TTL|ECL}
SEARCH:SEARCH<x>:TRIGger: A:SETHold:CLOCk: THReshold?
Arguments
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3V.
<NR3> is the clock level, in volts.
2-376 MSO4000 and DPO4000 Series Programmer Manual