Filter
Top Products
Commands Listed in Alphabetical Order
Group
Measurement
Syntax
MEASUrement:IMMed:SOUrce[1 ] {CH<x>|MATH<y>|REF<x>|D<x> }
MEASUrement:IMMed:SOUrce?
Related Commands
MEASUrement:IMMed:SOUrce2
Arguments
CH<x> is an input channel waveform. The x variable can be expressed as an
integer, where x is the channel number.
MATH<y> is a math w aveform. The y variable can be expressed as an integer of 1.
REF<X> is a reference waveform. The x variable can be expressed as an integer,
where x is the reference channel number.
D<X> is a digital waveform. The x variable can be expressed as an integer, where x
is the digital channel number. Digital channels are available only on MSO models.
Examples
MEASUREMENT:IMMED:SOURCE 1 MATH1
specifies Math1 as the immediate measurement source.
MEASUREMENT:IMMED:SOURCE? might return
:MEASUREMENT:IMMED:SOURCE1 CH3 indicating that channel 3 is the
immediate measurement source.
MEASUrement:IMMed:SOUrce2
Sets or returns the source to measure "to" for phase or delay immediate
measurements.
Tip: Source2 measurements only apply to phase a nd delay measurement types,
which require both a target (Source1) and reference (Source2) source.
Group
Measurement
Syntax
MEASUrement:IMMed:SOUrce2 {CH<x>|MATH< y>|REF<x>|D<x>}
MEASUrement:IMMed:SOUrce2?
Related Commands
MEASUrement:IMMed:SOUrce
MSO4000 and DPO4000 Series Programmer Manual 2-209