Filter
Top Products
Commands Listed in Alphabetical Order
Examples
DIAG:STATE EXE
Cute
starts diagnostics.
DISplay? (Query Only)
Returns the current display settings.
Group
Display
Syntax
DISplay?
DISplay:CLOCk
Sets or returns whether the oscilloscope displays the date and time. The query
form of this command returns an ON (1) or an OFF (0).
Group
Display
Syntax
DISplay:CLOCk {ON|OFF|<NR1>}
DISplay:CLOCk?
Related Commands
DATE, TIME
Arguments
ON enables the display of date and time.
OFF disables the display of date and time.
<NR1> = 0 disables the display of date and time; any other value enables the
display o f date and time.
Examples
DISPLAY:CLOCK ON enables display of date and time.
DISPLAY:CLOCK? might return :D ISPLAY:CLOCK 1 indicating that the display
of date and time is currently enabled.
DISplay:DIGital:HEIght
Sets or returns the number of available digital waveform p osition slots.
NOTE. If the number of live digital channels exceeds the number o f slots, their
height is reduced to a smaller size, allowing all digital channels to be displayed.
2-158 MSO4000 and DPO4000 Series Programmer Manual