Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
BUS:B<x>:PARa
llel:CLOCK:EDGE {EITher|RISing|FALling}
BUS:B<x>:PARallel:CLOCK:ED GE?
Arguments
EIther specifies either edge as the clock edge.
RISing specifies the rising edge as the cl
ock edge.
FALling specifies the falling edge as the clock edge.
BUS:B<x>:PARallel:CLOCK:ISCLOCKed
Sets or returns the parallel bus clock function for bus <x>, where x is the bus
number.
Group
Bus
Syntax
BUS:B<x>:PARallel:CLOCK:IS CLOCKed {YES|NO}
BUS:B<x>:PARallel:CLOCK:IS CLOCKed?
Arguments
YES specifes that the Parallel bus is clocked.
NO specifes that the Parallel bus is not clocked.
BUS:B<x>:PARallel:CLOCK:SOUrce
Sets or returns the Parallel bus source <x>, where x is the bus number.
Group
Bus
Syntax
BUS:B<x>:PARallel:CLOCK:SO Urce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12 |D13|D14|D15}
BUS:B<x>:PARallel:CLOCK:SO Urce?
Arguments
CH1–CH4 or D0–D15 specifies the channel to use as the Parallel bit source.
BUS:B<x>:PARallel:WIDth
Sets or returns the number of bits used for the width of the Parallel bus <x>,
where x is the bus number.
MSO4000 and DPO4000 Series Programmer Manual 2-101