Filter
Top Products
Commands Listed in Alphabetical Order
Group
Measurement
Syntax
MEASUrement:MEAS<x>:SOURCE 2 {CH<x>|MATH<y>|REF<x>|D<x> }
MEASUrement:MEAS<x>:SOURCE 2?
Related Commands
MEASUrement:MEAS<x>:TYPe
Arguments
CH<x> is an input channel waveform, where x is the channel number.
MATH<y> is the math waveform, which is always 1.
REF<x> is a reference waveform, where x is the reference channel number.
D<x> is a digital waveform, where x is the digital channel number. Digital
channels are available only on MSO models.
Examples
MEASUREMENT:MEAS4:SOURCE2 CH1 specifies CH1 as the delay "to" source
when making delay measurement.
MEASUREMENT:MEAS2:SOURCE2? might return
:MEASUREMENT:MEAS2:SOURCE2 MATH1 indicating that Math 1 is the
measurement 2 source.
MEASUrement:MEAS<x>:SOUrce<x>
For SOURce1: Sets or returns the source for all single channel measurements. For
delay or phase measurements, s ets or returns the waveform to measure "from".
For SOUrce2: S
ets or returns the waveform to me asure "to" when taking a delay
measurement or phase measurement.
Group
Measuremen
t
Syntax
MEASUrement:MEAS<x>:SOUrce <x> {CH<x>|MATH|D<x>}
MEASUrement:MEAS<x>:SOUrce <x>?
Arguments
CH<x> is an input channel waveform, where x is the channel number.
MATH is the math waveform.
REF<x> is a reference waveform, where x is the reference channel number.
D<x> is a digital waveform, where x is the digital channel number. Digital
channels are available only on MSO models.
MSO4000 and DPO4000 Series Programmer Manual 2-221