Filter
Top Products
Commands Listed in Alphabetical Order
POWer:HARMon
ics:IEC:CLAss
Sets or returns the equipment class for IEC harmonics.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:IEC:CLAss {A|B|C1|C2|C 3|D}
POWer:HARMonics:IEC:CLAss ?
Arguments
A specifies Cl ass A Equipment.
B specifies Cl ass B Equipment.
C1 specifies Class C Equipment that use Table 1 limits of the IEC standard.
C2 specifies Class C Equipment that use Table 2 limits of the IEC standard.
C3 specifies Class C Equipment that use Table 3 limits of the IEC standard.
D specifies Cl ass D Equipment.
Examples
POWER:HARMONICS:IEC:CLASS B se ts Equipment Class B for IEC harmonics.
POWER:HARMONICS:IEC:CLASS ? might return
:POWER:HARMONICS:IEC:CLAS S A indicating that the Equipment Class is A
for IEC harmonics.
POWer:HARMonics:IEC:FILter
Sets or returns the enabled state for filtering of IEC harmonics.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:IEC:FILte r {OFF|ON|0|1}
POWer:HARMonics:IEC:FILte r?
Arguments
ON or 1 enables filtering of IEC harmonics.
OFF or 0 disables filtering of IEC harmonics.
2-252 MSO4000 and DPO4000 Series Programmer Manual