Filter
Top Products
Command Groups
Table 2-31: Trigger Commands (cont.)
Command
Description
TRIGger:A Sets A trigger level to 50%
or returns current A trigger
parameters
TRIGger:A:BUS Sets or returns the serial
trigger type
TRIGger:A:BUS:B <1-4>:AU Dio:CONDition Sets or returns the trigger
condition for the AUDIO bus:
Start of Frame or Data
TRIGger:A:BUS:B<1-4>:AUDio:DATa:HIVALue Sets or returns the trigger
data upper word for the
AUDIO bus
TRIGger:A:BUS:B <1-4>:AU Dio:DATa:OFFSet Sets or returns the trigger
dataoffsetfortheAUDIO
bus
TRIGger:A:BUS:B<1-4>:AUDio:DATa:QUALi fier Sets or returns the trigger
data qualifier for the AUDIO
bus
TRIGger:A:BUS:B <1-4>:AU Dio:DATa:VALue Sets or returns the trigger
data lower word for the
AUDIO bus
TRIGger:A:BUS:B <1-4>:AU Dio:DATa:WORD Sets or returns the trigger
data alignment for the
AUDIO bus.
TRIGger:A:BUS:B <x>:CAN:CONDition Sets or returns the CAN
condition
TRIGger:A:BUS:B <x >:CAN:DATa:DIRection Sets or returns the CAN
trigger condition to be valid
on aR EAD, WRITE, or either
TRIGger:A:BUS:B <x >:CAN :DATa:QUALifi er Sets or returns the C AN data
qualifier
TRIGger:A:BUS:B <x>:CAN:DATa:SIZe Sets or returns the length of
thedatastringinbytestobe
used for CAN trigger
TRIGger:A:BUS:B<x>:CAN:DATa:VALue Sets or returns the binary
datastringtobeusedfor
CAN trigger
TRIGger:A:BUS:B <x >:CAN:FRAMEtype Sets or returns the CAN
trigger frame type
TRIGger:A:BUS:B <x>:CAN{:IDentifier|:ADDRess}:MODe Sets or returns the CAN
addressing mode
TRIGger:A:BUS:B <x>:CAN{:IDentifier|:ADDRess}:VALue Sets or returns the binary
address string used for the
CAN trigger
MSO4000 and DPO4000 Series Programmer Manual 2-49