Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
<NR3> specifies
the propagation time delay for the connected probe.
Examples
CH1:PROBE:PROPDELAY 100E-12 sets the CH1 propagation delay to 100 ps.
CH1:PROBE:PROPDELAY? might return :CH1:PROBE:PROPDE LAY 1.1E-9
indicating that the CH1 propagation delay is set to 1.1 ns.
CH<x>:PRObe:RECDESkew? (Query Only)
Returns the recommended deskew for the probe connected to the specified
channel.
Group
Vertical
Syntax
CH<x>:PRObe:RECDESkew?
CH<x>:PRObe:RESistance? (Query Only)
Returns the resistance factor of the probe attached to cha nnel <x>, where x is the
channel number.
Group
Vertical
Syntax
CH<x>:PRObe:RESistance?
Examples
CH2:PRObe:RESistance? might return :CH2:PROBE:RE SISTANCE
10.0000E+6
indicating that the input resistanc e of the probe attached to Channel
2is1MΩ.
NOTE. This query will return 0.0 if no probe is attached or the attached probe
does not report the input resistance.
CH<x>:PRObe:SIGnal
Sets or returns the input bypass setting of a TekVPI probe attached to channel
<x>, where x is the channel number. The probe must support input bypass, for
example TCP0001. This command is ignored if sent to an unsupported probe.
Group
Vertical
2-128 MSO4000 and DPO4000 Series Programmer Manual