Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
CH<x>:PRObe:S
IGnal {BYP ass|PASS}
CH<x>:PRObe:SIGnal?
Arguments
BYPass sets the probe to Bypass mode.
PASS sets the probe to Pass mode.
CH<x>:PRObe:UNIts? (Query Only)
Returns a string describing the units of meas ure for the probe attached to channel
<x>, where x is the channel number.
Group
Vertical
Syntax
CH<x>:PRObe:UNIts?
Examples
CH4:PROBE:UNITS? might return :CH4:PROBE:UNITS "V" indicating that the
units of measure for the probe attached to channel 4 are volts.
CH<x>:SCAle
Sets or returns the vertical scale for the channel specified by <x>, where x is the
channel number.
Each waveform has a vertical scale parameter. For a signal with constant
amplitude, increasing the Scale causes the waveform to be displayed smaller.
Decreasing the scale causes the waveform to be displayed larger.
Scale affects all waveforms, but affects cha nnel waveforms differently from
other waveforms:
For channel waveforms, this setting controls the vertical size of the a cquisition
window as well as the display scale. The range and resolution of scale
values depends on the probe attached and any other external factors you have
specified.
For reference and math waveforms, this setting controls the display only,
graphically scaling these waveforms and having no affect on the acquisition
hardware.
Group
Vertical
MSO4000 and DPO4000 Series Programmer Manual 2-129