Filter
Top Products
Commands Listed in Alphabetical Order
ERRor specifies
an error frame.
OVERLoad specifies an overload frame.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN{:IDentifier|:ADDRess}:MODe
Sets or returns the CAN addressing mode for a trigger search to a standard or
extended format.
SEARCH<x> is the search number and B<x> is the bus number.
Conditions
This command requires a DPO4AUTO application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN{: IDentifier|:
ADDRess}:MODe {STandard|EXTended}
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN{: IDentifier|:
ADDRess}:MODe?
Arguments
STandard specifies an 11-bit identifier field.
EXTended specifies a 29-bit identifier field.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN{:IDentifier|:ADDRess}:VA Lue
Sets or returns the binary address str ing to be used for a CAN trigger search if
the search condition is ID or IDANDDATA.
SEARCH<x> is the search number
and
B<x> is the bus number.
Conditions
This command requires a DPO4AUTO application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN{: IDentifier|:
ADDRess}:VALue <bin>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN{: IDentifier|:
ADDRess}:VALue?
Arguments
<bin> is the address in binary format.
2-338 MSO4000 and DPO4000 Series Programmer Manual