Filter
Top Products
Commands Listed in Alphabetical Order
MEASUrement:
REFLevel:ABSolute:MID[1]
Sets or returns the mid reference level, and is the 50% reference level when
MEASUrement:REFLevel:METHod is set to Absolute. This command affects the
results of pe
riod, frequency, delay, and all cyclic measurements.
NOTE. this command affects the associated reference l evel parameter for all
MEASurements:IMMed and the four periodic measurements.
Group
Measurement
Syntax
MEASUrement:REFLevel:ABSol ute:MID[1] <NR3>
MEASUrement:REFLevel:ABSol ute:MID[1]?
Related Commands
MEASUrement:REFLevel:METHod
Arguments
<NR3> is the mid reference level, in volts. The default is 0.0 V.
Examples
MEASUREMENT:REFLEVEL:ABSOL UTE:MID 1 .71 sets the mid reference level
to .71 V.
MEASUREMENT:REFLEVEL:ABSOL UTE:MID? might return
:MEASUREMENT:REFLEVEL:ABSO LUTE:MID 0.7100E+00 indicating
that the a bsolute mid1 reference level is set to .71 V.
MEASUrement:REFLevel:ABSolute:MID2
Sets or returns the mid reference level for the "to" waveform when
taking a delay measurement, and is the 50% reference level when
MEASUrement:REFLevel:METHod is set to Absolute. This command affects the
results of delay measurements.
NOTE. this command affects the associated reference l evel parameter for all
MEASurements:IMMed and the four periodic measurements.
Group
Measurement
Syntax
MEASUrement:REFLevel:ABSol ute:MID2 <NR3>
MEASUrement:REFLevel:ABSol ute:MID2?
MSO4000 and DPO4000 Series Programmer Manual 2-229