Filter
Top Products
Commands Listed in Alphabetical Order
POWer:RIPPle
:RESults:MEAN? (Query Only)
Returns the mean of the peak-to-peak ripple measurements.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:RIPPle:RESults:MEAN ?
Examples
POWER:RIPPLE:RESULTS:MEAN ? might return
:POWER:RIPPLE:RESULTS:MEA N 1.0 indicating that the mean peak-to-peak
amplitude is set to 1.0 V.
POWer:RIPPle:RESults:MIN? (Query Only)
Returns the minimum of the peak-to-peak ripple measurement.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:RIPPle:RESults:MIN?
Examples
POWER:RIPPLE:RESULTS:MIN? might return :POWER:RIPPLE:RESU LTS:MIN
0.9
indicating that the minimum p eak-to-peak amplitude is set to 0.9 V.
POWer:RIPPle:RESults:STDdev? (Query Only)
Returns the standard deviation of the peak-to-peak ripple measurements.
Conditions
T
his command requires a DPO4PWR application module.
Group
Power
Syntax
POWer:RIPPle:RESults:STDd ev?
2-286 MSO4000 and DPO4000 Series Programmer Manual