Filter
Top Products
Operating Basics: User Interface
OTS9100 User Manual 2-65
Measurements Menu
When Measurements is selected from the Navigation window, the Measurements menu is
displayed. The Measurements menu provides separate configuration control over each receiver
through associated icons.
If an Rx icon is clicked, the Receiver signal monitor menu is displayed. This menu contains
separate menu screens; each selected by a tab. These tabs, each display an aspect of the Receiver
Measurement function.
Receiver - Real-Time
The Real-Time menu has four tab selections provided as property page display choices: Real-
Time, Cumulative, History and IP Measurements. The real-time display menu provides the
ability to view the errored seconds, error counts, and error ratios for each error condition
monitored during the last n seconds (up to sixty). There is a Section and Line View, a Path View
and a Selected View. If Selected is chosen, a window is displayed, which allow the user to select
four error measurements.
Figure 2-41: Real-Time menu – Section and Line display