Filter
Top Products
Operating Basics: User Interface
2-72 OTS9100 User Manual
Receiver – IP Measurements
When Measurements is selected from the Navigation window, the Measurements menu is
displayed. If a Receiver icon is clicked, the Receiver Measurements menu is displayed. This
menu contains four separate menu screens; each selected by a tab. These tabs, Real-Time,
Cumulative, History, and IP Measurements, each display an aspect of the Receiver Measurement
function.
The IP Measurements screen, as shown in Figure 2-7, provides the measurement results of the
HDLC Frames and the IP Packets/Bytes.
Figure 2-7: Receiver IP Measurements display
The IP Packets section results are only updated for HDLC frames with correct FCS. Within the
IP Packets, the payload is only verified for packets with a valid header checksum. Packets with
No Errors are packets with correct FCS, valid header checksum, and no IP payload errors.