Filter
Top Products
Operating Basics: User Interface
2-74 OTS9100 User Manual
Analysis Menu
When the Analysis Category bar is selected from the Navigation window, and an icon chosen,
the Analysis properties menu associated with that device icon is displayed. The results are
accumulated while the test runs and are cleared when a new test begins.
The Analysis property menu contains two separate menu screens; each selected by a tab. These
tabs, SONET/T1M1 and SDH/G.826, each display an aspect of the Receiver Analysis function.
Analysis – SONET/T1M1
The SONET/T1M1 menu has two selections provided for Analysis Results; Section/Line and
Path. Click either one to display the SONET analysis results for that selection. The display
reflects the available Near End and Far End error count analysis data, as shown in Figures 2-48
and 2-49. The analysis data is explained in greater detail below.
Figure 2-48: Analysis menu – SONET/T1M1 Section/Line