Filter
Top Products
Reference: Remote Commands ~ Command Description
3-74 OTS9100 User Manual
:SYSTem:COMMunicate:SERIal:COM2A:PARIty
This command sets, for the COM2 serial port, the function of the high-order (eighth) bit in each serial. The
query form returns the current setting.
Syntax :SYSTem:COMMunicate:SERIal:COM2A:PARIty?
:SYSTem:COMMunicate:SERIal:COM2A:PARIty <Enum>
Parameter Description
NONE No parity
ODD Odd parity
EVEN Even parity
MARK The parity bit is always set
SPACE The parity bit is always clear
:SYSTem:COMMunicate:SERIal:COM2A:PROMpt
This command enables or disables the user prompt on the COM2 serial port. When the prompt is
enabled, the system prompts when it is ready for a command. The query form returns the current setting.
Syntax :SYSTem:COMMunicate:SERIal:COM2A:PROMpt?
:SYSTem:COMMunicate:SERIal:COM2A:PROMpt <Boolean>
:SYSTem:COMMunicate:SERIal:COM2A:RATE
This command sets the baud rate for the COM2 serial port. The query form returns the current setting.
Syntax :SYSTem:COMMunicate:SERIal:COM2A:RATE?
:SYSTem:COMMunicate:SERIal:COM2A:RATE <Enum>
Parameters Description
R1200B 1200 baud
R2400B 2400 baud
R4800B 4800 baud
R9600B 9600 baud
R19KB 19.2K baud
R38KB 38.4K baud
R57KB 57.6K baud
R115KB 115.2K baud