Tektronix 071-0855-05 Telescope User Manual


 
Operating Basics: User Interface
2-34 OTS9100 User Manual
Transmitter – Path Overhead
The Path overhead property menu, as shown in Figure 2-16, of the Transmitter setup can be used
to pass or change the 9.95238 Gb/s signal path overhead bytes in the first STS-1 or STM-1 of the
OC-192 or STM-64 frame, respectively. In addition, the J1 Trace and C2 path label may be
edited. The editing procedure for each is described in more detail in the following sections.
NOTE: Overhead data displays are in hexadecimal format. All edits to overhead display must be
in hexadecimal format.
Figure 2-16: Transmitter – Path Overhead Property Menu