Filter
Top Products
OTS9100 User Manual C-1
Emergency Startup Disk
These instructions explain how to make an emergency startup disk for your OTS system.
It is recommended that you take the time to do this procedure every time you change your system
configuration (such as modifying the network settings). The process takes less than five
minutes.
Accessing Help Files
The procedure for making an emergency startup disk is located in the Windows Help files.
Follow the steps below to access these files and create the emergency disk. You will need a
blank floppy disk for the procedure.
NOTE: Make sure you are on the correct OTS system before making the emergency disk.
Because of licensing information, an emergency startup disk must be made for each system.
1. Click on the Start menu and select Help.
2.
In the Help dialog box, select the Index tab and type in “Emergency”.
3. The following dialog box is displayed. Click on the button as prompted to begin making the
emergency disk.