Filter
Top Products
Operating Basics: User Interface
2-54 OTS9100 User Manual
Receiver – IP Setup
The IP Setup menu of the Receiver setup, as shown in Figure 2-6, provides the IP setup
information. Each of the selections available is described in more detail in the following
sections.
Figure 2-6: Receiver Setup – IP Setup menu
The Stream Index is fixed at a value of 1.
IP Setup
The IP Payload data-gram starts with the IP header.
POS Scrambling can be set to ON or OFF via the pull down menu.
The IP Payload is selectable by the pull down menu. The selections available are:
PRBS 31
16-bit Word, user-selectable
If the 16-bit Word is selected, an EDIT button and selection box is displayed.