Filter
Top Products
Operating Basics: User Interface
OTS9100 User Manual 2-81
Remote Access Setups
The remote control settings for selecting GPIB, RS-232, and Ethernet LAN controls are located
under the menu bar in the System menu. Click on the System menu and select Remote Control.
The Remote Control Settings dialog box is displayed. Across the top are tabs for GPIB, COM1,
COM2, and Telnet, as shown in Figures 2-63, 2-64, and 2-65.
To set up the proper configurations for the type of remote access desired, select the appropriate
setup information via the pull-down menus and boxes provided.
Figure 2-63: GPIB Remote Control Settings
Figure 2-56: COM 1/COM 2 Remote Control Settings