Filter
Top Products
Reference: Remote Commands ~ Command Description
3-44 OTS9100 User Manual
:SENSe:TEST:DESCription
This command sets the description text that is written to the results file at the start of a text. The text may
be up to 127 characters long. The query form returns the current setting.
Syntax :SENSe<slot>:TEST:DESCription?
:SENSe<slot>:TEST:DESCription <String>
:SENSe:TEST:MODE
This command sets the way the OTSsystem runs a test. The query form returns the current setting.
Syntax :SENSe<slot>:TEST:MODE?
:SENSe<slot>:TEST:MODE <Enum>
Parameters Description
CONTinuous The test runs continuously
TIMEd The test runs for a preset amount of time
REPEtitive The test runs for a preset time and then restarts
:SENSe:TEST:STATe
This command controls the OTSsystem's execution of a test. The query form returns the state of a
currently-executing test.
Syntax :SENSe<slot>:TEST:STATe?
:SENSe<slot>:TEST:STATe <Enum>
Parameters Description
RUN Start a test
PAUSe Pause the test in progress
RESUme Resume the test in progress
END Stop the test
RESTart Stop the test and start a new test
STARTING A test is starting (status query only)
STOPPING A test is stopping (status query only)
:SENSe:TEST:TIME
This command sets the time duration for a test. The query form returns the currently programmed time.
Syntax :SENSe<slot>:TEST:TIME?
:SENSe<slot>:TEST:TIME <NR1>