Filter
Top Products
Reference: Remote Commands ~ Command Description
3-62 OTS9100 User Manual
:SOURce:INSert:IP:ANOMaly:RATE
This command sets the rate at which continuously generated IP anomalies are inserted. The query form
returns the current value.
Syntax :SOURce<slot>:INSert:IP:ANOMaly:RATE?
:SOURce<slot>:INSert:IP:ANOMaly:RATE <NR3>
:SOURce:INSert:IP:ANOMaly:RATE:RANGe
This query returns the minimum and maximum rate values for the specified IP anomaly type. The values
returned are formatted as NR3 parameters.
Syntax :SOURce<slot>:INSert:IP:ANOMaly:RATE:RANGe? <Parameter>
Parameters Description
NONE No anomaly is selected
FCS HDLC frame check sequence errors
PAYLoad IP payload errors
CRC IP header check sum errors
:SOURce:INSert:IP:ANOMaly:TYPE
This command selects the type of IP anomaly inserted. The query form returns the current selection.
Syntax :SOURce<slot>:INSert:IP:ANOMaly:TYPE?
:SOURce<slot>:INSert:IP:ANOMaly:TYPE <Parameter>
Parameters Description
NONE No anomaly is selected
FCS HDLC frame check sequence errors
PAYLoad IP payload errors
CRC IP header check sum errors
:SOURce:MEASure:HDLC:BYTes
This query returns the number of HDLC bytes transmitted with good FCS.
Syntax :SOURce<slot>:MEASure:HDLC:BYTes?