Filter
Top Products
Operating Basics: User Interface
2-30 OTS9100 User Manual
Transmitter – Transport Overhead
The Transport overhead property menu, as shown in Figure 2-11, can be used to pass or change
the 9.95238 Gb/s signal overhead bytes in the first STS-1 or STM-1 of the OC-192 or STM-64
frame, respectively. In addition, the J0 Trace and S1 byte may be edited. The editing procedure
for each is described in more detail in the following sections.
NOTE: Overhead data displays are in hexadecimal format. All edits to overhead display must be
in hexadecimal format.
Figure 2-11: Transmitter – Transport Overhead menu