Filter
Top Products
Specifications
A-14 OTS9100 User Manual
Receiver Input and Output Specifications
OTS91L4, OTS91L6, OTS91L7 Signal Name: 9.95238 Gb/s Optical Input Data
Signal Rate: 9.95238 Gb/s ± 100ppm
Connector: FC/PC (standard), ST or SC available
Wavelength: 1290nm to 1565nm
Maximum Input Power:0 dBm
Input Power Range: -17 dBm to -2dBm at 1525 nm - 1565 nm, BER <10
-12
-16 dBm to -2 dBm at 1290 nm - 1330 nm, BER< 10
-12
Input Reflectance: < -27 dB
Jitter Tolerance: meets limits for OC-192c and SMT-64c network interface specifications
per (GR-1377-CORE, Issue 5, 12/98) and G.825 (2/99).
Description: Primary optical input from device under test
Event Trigger Output
Connector: SMA
External Termination: 50Ω, DC coupled
Voltage Output LOW: 0.8V ≥ Vol ≥ 0.0V
Voltage Output HIGH: 3.8V ≥ Voh ≥ 1.7V
Pulse Width: 25.7 ns (nominal)
Description: User specified to be asserted (active HIGH) for each generated Alarm or Error.
RX Clock Output
Connector: SMA
External Termination: 50Ω, DC Coupled
Voltage Output LOW: 0.80 V +/- 0.20 V
Description: Used for Transceiver supporting through-mode.
RX Data Input
Connector: SMA
Internal Termination: 50Ω, DC coupled
Voltage Level: 1 Vpp (typical)
Frequency: 9.95238 GB/s Data
Description: Electrical Data signal from the Optics card.