Filter
Top Products
Operating Basics: User Interface
2-86 OTS9100 User Manual
SCPI Output
The SCPI Output option is provided for use in programming remote commands. To activate,
click on the View menu and select SCPI Output. A dialog box, as shown in Figure 2-63, is
displayed which provides an echo for all commands performed via the user interface. The
commands are shown in SCPI format and may be copied from the dialog box into a text
document.
Figure 2-63: View SCPI Output dialog box
NOTE: If the OTS system contains different module types (for example, OTS91T2 and OTS93T1
cards) all shared remote commands must include a slot designation. If the slot number is not
included, the system will return an error message stating that a slot number is required.